Control traffic and protect pavement with speed bump installation in Fort Smith, AR.
Control traffic and protect pavement with speed bump installation in Fort Smith, AR. We install asphalt speed humps, curbs, and other accessories that slow vehicles and guide drivers. Improve safety in parking lots, private roads, and drive aisles with clearly defined features.
Legacy Asphalt Fort Smith provides professional speed bump installation throughout Fort Smith, AR, Arkansas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (479) 475-5014 or request your free quote.
Legacy Asphalt Fort Smith installs speed bumps, curbs, and related asphalt accessories for commercial lots, private drives, and small HOAs across Fort Smith and the River Valley. Our focus is simple: slow vehicles where you need it, protect your pavement edges, and keep water and traffic moving in the right places.
We do not push one-size-fits-all speed bumps. A church parking lot that fills up twice a week needs different layout and heights than an apartment complex with kids playing outside every afternoon, or an industrial yard with delivery trucks. We walk the site with you, watch how vehicles currently move, and talk through actual problem spots such as near building entrances, crosswalks, or blind corners.
Fort Smithβs hot summers, heavy rain events, and occasional ice affect how speed bumps and curbs perform. Tall, hard transitions can break loose in heat, and shallow drains can clog with leaves and gravel. We design with that in mind so what we install holds up through August heat on fresh blacktop and January freeze-thaw on older parking lots.
Our speed bump installation process is straightforward and methodical so you get consistent results and predictable traffic calming.
1) Site evaluation and layout: We measure lane widths, turning radiuses, and clearances for emergency and delivery vehicles. We also look at where water currently flows so new bumps or curbs do not trap standing water. We then mark proposed bump locations with paint and, when appropriate, set out temporary cones so you can visualize how traffic will move before anything is permanent.
2) Choosing bump type and height: For typical parking lots we often use asphalt speed humps between 2 and 3 inches high, shaped in a gentle arc over 12 to 14 feet of length. These are more comfortable at 10 to 15 mph and are friendlier to ambulances and fire trucks. For private drives or problem cut-through streets, we can use more aggressive profiles or modular rubber bumps that are bolted into the pavement, which can be removed or moved later.
3) Surface prep: If the existing asphalt is cracked, oxidized, or rutted where the bump will go, we clean, dry, and, if needed, mill or saw cut a shallow recess so the new asphalt keys in rather than sitting on top like a lump. A tack coat bonding agent is applied so the bump becomes part of the pavement, not an attachment that will shear off in a few summers.
4) Asphalt placement and shaping: We use hot mix asphalt, placed and compacted in lifts. The crew shapes each bump with lutes and hand tampers, then runs a small roller to get a smooth, even crown. Consistent profile from edge to edge is what keeps drivers from swerving to avoid a harsh corner.
5) Striping and curing: Once the surface has cooled enough, we apply reflective yellow or white markings and, when needed, chevron or βBUMPβ legends. In most cases, vehicle traffic can resume within a few hours, but we will advise on timing based on air temperature and mix design.
Curbs and related accessories protect your pavement edges from unraveling and keep vehicles where they belong. Legacy Asphalt Fort Smith installs both asphalt and concrete curbs, along with wheel stops and drainage-related pieces.
Asphalt curbing is typically installed while we are resurfacing or repaving a lot. It is formed with asphalt along the edge, then compacted and shaped to the desired profile. This option is cost effective and blends visually with the driving surface. Concrete curbs, such as standard 6 inch vertical or rolled curb, are poured in forms over a compacted base and reinforced when needed. These handle repeated wheel impacts better and give a more defined border for landscaping beds and sidewalks.
Wheel stops (parking blocks) can be concrete, recycled plastic, or rubber. Concrete is heavy and long lasting but can chip with repeated impacts or if snow equipment hits them. Rubber and plastic are easier on vehicles and can be pinned into the asphalt with rebar, which works well in lots where frequent configuration changes are likely.
On many Fort Smith sites, drainage is the weak point, not the asphalt itself. We design curb cuts, shallow swales, and valley gutters to keep water moving to inlets instead of standing around your bump or curb line. Poorly planned speed bumps can dam water and create ice sheets in winter. We avoid that by adjusting curb heights, carving channels, or using tapered humps that let water pass beneath the lowest tire path.
Speed bump installation, curbing, and accessories are relatively small projects, but the final cost still depends on several real-world factors.
Quantity and length: A single 12 foot bump installed during a larger paving job will be relatively inexpensive per foot. Several separate mobilizations to different sites just for small bumps cost more because equipment and crew still have to move each time. We often recommend grouping multiple small projects or adding bumps during scheduled sealcoating or overlay to reduce cost.
Existing pavement condition: Intact, reasonably level asphalt lets us mill, tack, and build bumps directly. Lots with extensive cracks, potholes, or base failure often need localized dig outs or patching first. If we install bumps or curbs over failing pavement, they will crack and separate, so we are upfront about what needs fixing beforehand.
Material choices: Asphalt humps formed on-site are typically more economical for larger areas. Pre-formed rubber or plastic speed bumps have higher material cost per foot but install quickly and can be moved. Concrete curbs usually cost more than asphalt curbing because of forming, reinforcement, and cure time.
Weather and season: In Fort Smith, we avoid placing hot mix asphalt for bumps on days with cold rain or when surface temperatures are very low, because compaction and bonding suffer. Summer work days can be longer, which speeds completion, but we must also watch pavement surface temperatures so striping adheres properly.
We provide itemized estimates that separate each bump, curb run, and accessory so you can see where your money is going and adjust the layout if needed to fit your budget.
Poorly installed speed bumps and curbs tend to fail in predictable ways. Our crews work to avoid those issues from the start so you are not calling for repairs every year.
Bumps breaking away or cracking: This usually happens when the underlying pavement was not cleaned, tacked, or structurally sound. We test bond by looking for solid tack coverage and, where necessary, we cut a keyed joint so the new asphalt ties in mechanically. In high-load areas such as near dumpster pads we may modify the mix or add thickness for durability.
Trip hazards and harsh transitions: Overly steep bump profiles or random concrete patches create stub-toe edges and harsh hits on suspensions. We use templates and repeated level checks to keep slopes consistent. For pedestrian routes crossing curbs, we integrate curb ramps and paint markings so changes in elevation are obvious.
Water pooling: When a bump or curb blocks existing drainage paths, standing water leads to stripping and potholes. During layout we track water flow, especially near inlets and in low spots. If a bump must cross a natural flow line, we can adjust its height, add scuppers, or design a shallow channel to move water past it.
Visibility issues: Unmarked black speed humps on dark asphalt are a problem at night and in wet weather. We use high contrast paint and, when appropriate, reflective striping or embedded reflectors. For curbs near drive approaches, we may recommend painting the first several feet for visibility, especially in older lots with tight geometry.
A clear plan before installation helps keep your project quick and avoids changes after the asphalt is down. Legacy Asphalt Fort Smith will help you think through the details, but some decisions are easier if you consider them in advance.
Target speeds and problem spots: Be specific about where vehicles drive too fast and what speed you would be comfortable with. For example, keeping speeds under 10 mph near school drop-offs or under 15 mph near apartment mailboxes. This guides the number and spacing of bumps.
Vehicle mix: Note the types of vehicles using your lot or driveway. If you regularly receive 18 wheelers or have low-clearance sports cars, that affects bump height and shape. Emergency vehicle routes, such as the path an ambulance would take to the building entrance, should be shared so we can avoid creating obstacles in those lanes.
Snow and maintenance plans: While Fort Smith does not see constant snow, ice events and the occasional plow pass still happen. If your maintenance crew or contractor uses plows or heavy brooms, we recommend certain bump profiles and curb shapes that hold up better and we advise marking bump locations clearly.
Future changes: If you expect to expand a building, change traffic flow, or re-stripe the lot soon, we can phase bump and curb work so you do not pay to relocate them later. In some cases, modular rubber bumps or movable wheel stops make sense while you finalize long-term layouts.
Access during work: Think about business hours, delivery schedules, and tenant parking. We can often stage work so a portion of the lot stays open while we install and stripe the other areas, which keeps disruption to a minimum.
Professional speed bumps, curbs, and asphalt accessories, done right the first time, quality materials, honest pricing, and results that last.Legacy Asphalt Fort Smith